• Unitized Dewatering System Unit

    FluidControl offers the BRANDT™ Dewatering System Skid Unit (DWS Unit), a self contained, portable system. The DWS Unit has a shale tub, with a footprint for the HS-1960 or the HS-2172 centrifuge.

     

    Description

    FluidControl offers the BRANDT Dewatering System Skid Unit (DWS Unit), a self contained, portable system. The DWS Unit has a shale tub, with a footprint for the HS-1960 or the HS-2172 centrifuge. The unit has two cone shaped tanks on the bottom end to aid in concentrating the flocculated solids slurry. A 7.5 hp agitator is contained within each tank cone. These agitators are operational when stripping of raw mud is required. Each tank cone has approximately 8.5 m3 slurry capacity.

    Two polymer floc tank mixing compartments are contained on the skid unit with one 2 hp agitator motor and one gearbox per compartment. The DWS Unit is designed for drilling the “fast hole clear water section” of a well and does not contain a mixing hopper. The unit comes with a 32’ x 9’ electric, heated enclosure with a 100 amps, 3-wire, 4-pole plug requiring a 480 volt rig receptacle. The enclosure features two Penta drive 1 hp Moyno pump motors (180 volt DC) that pump/inject polymers, required for the flocculation/dewatering process.

    Features/Benefits

    FEATURES

    BENEFITS

    Electric Heated Enclosure

    Ensures optimum performance during cold weather

    Unitized Dewatering System Skid

    Portable system contained in one truck load

    Flexible Centrifuge Footprint for installation

    Diversity on centrifuge installation for different applications

    Hydraulic stand lift

    Safety conscious and convenience of portability

    Lighted shale compartment

    Eases safety concerns when cleaning and solids removal during non-daylight operation

    Diversity on stairwell installation

    Allows rig up to accommodate different onsite requirements

    Oversized polymer injection system

    Saves time when chemical batch mixing

    Specifications

    Overall Dimensions

    Skid (L x W x H)

    8 ft x 42 ft x 11.5 ft (2438 mm x 12802 mm x 3505 mm)

    Shale Tub (L x W x H)

    8 ft x 14 ft x 2 ft (front) 4 ft (back) shale tub capacity (2438 mm x 4267 mm x 610 mm (front) 1219 mm (back)

    Shale Tub Capacity

    55 bbls (8.5 m3)

    Floc Tank Compartments

    4 ft x 4 ft x 9 ft – 25 bbl/compartment (1219 mm x 1219 mm x 2743 mm – 4 m3/compartment)

    Weight (approximate)

    45,000 lbs (20,455 kg)

    Fluid Capacity

    700 gpm (3000 lpm)

    Power requirements

    480 Volt 100 amp receptacle (centrifuge operation not included)

    Injection pump

    (2) Penta Drive – 1 hp Moyno Motors (180V DC)