• Corrosion Control

    Mitigation in drilling

    While drilling:

    • Use a wiper rubber while tripping out of hole
    • Keep racking area clean (free of well fluid and solids)
    • Apply thread compound on connections

    When laying pipe down:

    • Clean inside and outside of pipe
    • Clean protectors before putting them back on connections
    • Clean and dope connection before putting protectors back on

    Corrosion rings can be used with API connections seating in the box tapered section. Double-shouldered connections leave no space for corrosion rings to seat on. A special tool (double sub) needs to be built to hold the ring.

    Mitigation in completion operations

    While running completion:

    • Use a wiper rubber while tripping out of hole
    • Wash the pipe on every trip out
    • Clean, dry and dope pins and boxes before racking
    • Use a rubber racking mat to prevent accumulation of completion fluid around pins

    Sufficient amount of dope should be applied when running completion. Completion fluids are generally more corrosive than drilling fluids.

    d1

    Results 1 - 0 of about 0.
    Page 1 of 0  
    Page 1 of 0