• HydraTong ARN-270

    The HydraTong™ ARN models lets the drill floor remain trackless due to the articulated arm design.

    Description

    In addition, the unit has a modular design allowing interchanging between different modules, e.g. from a ordinary drill pipe module to casing tong modules. Since the ARN optionally can be delivered with powered slew rotation and skid unit, this provides various drill floor lay out alternatives, like rotate and extend between two or more pipe targets or skid to a park position when other tools requires the drill floor area. The combination of the articulated arms and the skid could also give extra high stick up height.*

    By utilizing the slew function eventually combined with the skid option, the ARN could act as back up when installed on drill floors with dual roughnecks.

    The ARN-270 includes the latest Torque Wrench design, which allows 60° rotation, which ensures efficiency during make and brake of single drill pipes and stands.

    Better and more accurate torque is ensured due to optimized triple grip design, providing less box deformation and control of the torque parameters.

    The torque wrench is self-centering with a flexible suspension system, eliminating alignment problems.

    By considering service life time and maintenance availability, the Torque Wrench design has a robust construction, low part count and minimized need of lubrication by utilizing the latest bearing technology.

    Together with available options as pipe doper and mud bucket, it is possible to obtain smooth and effective pipe connection sequences in an automated drilling system.

    Features/Benefits

    • Triple grip torque wrench with 60° rotation
    • High torque self-aligning spinning wrench
    • High accuracy control possibilities
    • Robust and maintenance optimized torque wrench
    • Dual elevators for spinner and torque wrench
    • Trackless extension towards pipe target
    • Slew rotation 
    • Deluge water spray for spinning rollers
    • High stick up possibilities
    • Sensors for anti-collision system, multi machine control and pipe interlock management
    • ATEX certification
    • CE marked (optional)
    • Mud bucket (optional)
    • Pin end doper (optional)
    • Portable control unit; radio or cable (optional)
    • Bit breaker (optional)
    • Skid base including rails (optional)
    • Turntable for offline mousehole operations (optional)
    • Casing  tong frames for  2 3/8” to 25” Casing (optional)
    • Torque Turn System, Casing Joint Analysis (optional)
    • Stabbing Guide (optional)
    • Tool Joint Finder (optional)

    Specifications

    • Service: Make up / Break out of Drill pipe, Collars and Casing (optional)
    • Design code / Standard: NS3472, FEM
    • Area classification: IEC Zone 1
    • Minimum operating temperature: -20°C  
    • Environment: Harsh
    • Minimum hydraulic flow rate: 420 l/min  
    • Minimum working pressure: 207 bar    
    • Maximum operating pressure: 210 bar    
    • Normal operating pressure: 207 bar    
    • Total weight including Tool Frame: 8400 kg    
    • Pipe range: 3½" to 10" (2d" kit optional)
    • Maximum stick up: 2300 mm* (2970 mm)   
    • Make up torque, up to: 270 000 Nm  [200,000 ft-lbs]
    • Break out torque, up to: 270 000 Nm  [200,000 ft-lbs]
    • Spinner static stalling torque (dry pipe): 4700 Nm  (based on 5½” drill pipe)
    • Spinner speed: 0-100 rpm
    • Spinner elevation: 1000 mm