• PS-30 Power Slip

    Improves both safety and rig efficiency as proven with the FMS Flush Mounted Casing Slip.

    Tool, where applicable, updated in accordance with governing API standards

    Installs Flush With the Drill Floor:

    • Improves both safety and rig efficiency as proven with the FMS Flush Mounted Casing Slip.
    • Eliminates work platforms for stabbing and operating power tongs during casing running operation

    Power Down Slips:

    • Reacts up to 45,000 ft/lbs of torque, on 14" casing with sufficient string weight.

    Insert Carriers Make This a Universal Tool, Not Just Another Power Slip:

    • Allows the PS 330 to handle all pipe types and sizes, including BHA's, collars, drill pipe, casing and tubing from 2 3/8" to 20".
    • Quick changeover from BHA's to collars to drill pipe allows the PS 30 to trip the entire string.
    • Insert carriers can be changed with pipe in the hole.
    • Carrier change can be done in 5 minutes or less.
    • Special drop and lock, pull and release design eliminates loose pieces such as bolts and pins.
    • The PS 30 can be fitted with insert bowls should it become necessary to use hand slips.

    Like the Insert Carriers, the Slips Also Have a Rapid Change System:

    • Two handles on the middle slip segment retract and lock the springloaded slip retaining pin.
    • No loose parts.

    Centering Device:

    • The PS 30 is standard equipped with a centering device incorporated in the top cover.

    Slip Set-back Designed to Pass Tool Joints, BHA's and Casing Centralizers:

    • The slip set back allows tool joints and drill pipe protectors to pass without dragging on the inserts, even when drilling with 6 5/8" drill pipe.
    • The PS 30 will pass: BHA's when tripping; Centralizers when running casing.

    Control Panel:

    • A control panel, which can be located in the driller's console, enables the driller to operate the slips