• S-Series-Auxiliary Elevators

    Varco BJ ''S'' type elevators are conventional center latch collar type elevators for handling a single joint of casing or tubing.
    Description

    Tool, where applicable, updated in accordance with governing API standards

    Varco BJ ''S'' type elevators are conventional center latch collar type elevators for handling a single joint of casing or tubing. The S type elevator has a 5 ton capacity covering pipe sizes from 2-3/8'' to 24-1/2'' OD.

    SJL-elevator
    Varco BJ "SJL" type elevators are conventional center latch collar type elevators for handling a single joint of casing or tubing. The SJL type elevator has a 5 ton capacity covering pipe sizes from 2 3/8" to 24 1/2" O.D.

    SJX-elevator
    The SJX-single joint elevator is designed for running single joints of tubing and casing from the V-door to well center. The SJX-elevator is recommended to be used underneath the CRT Casing Running Tool. It enables the derrick-man on the monkey-board to open the elevator from 2 sides, depending on how the elevator is positioned when stopped.

    SPL-elevator
    Varco BJ "SPL" type elevators using tapered inserts are conventional center latch type elevators for handling a single joint of 18" drill pipe and 12" or 5" casing and tubing. There are 3 types with 5 ton capacity covering 18" drill pipe sizes from 3 1/2" to 6 5/8" O.D, 12" tubing sizes from 2 3/8" to 4 1/2" O.D. and 5" casing or tubing sizes 2 7/8" to 10 3/4" O.D.

    SJH-elevator
    The SJH Horizontal Pick Up elevator, designed to pick up tubular lying flat on a surface without having to lift the tubular prior to closing the elevator. The elevator is capable of lifting drill pipe, recessed/zip lift drill collars and casing. It will handle single joints of pipe straight from cantilever to off-line stand building system.