• Insertable PC Pump System

    Our innovative insertable progressing cavity pump design allows our customers to insert a progressing cavity pump inside the production tubing and pressure test the tubing string with one easy-to-use tool.
    Description

    Our innovative insertable progressing cavity pump design allows our customers to insert a progressing cavity pump inside the production tubing sizes from 2 7/8" to 5 1/2" and is available in both a Single Run and Double Run design.  The Single Run deisgn can be factory configured as a flushable or non-flushable system while the Double Run design is always flushable and allows for the primary seal to be pressure tested during installation.

    Features/Benefits

    • There is no need for a service rig to pull the production tubing to change a downhole pump.
    • Pump changes can be done with a flush-by equipped for rod handling.
    • The unit minimizes the need to remove production tubing, reducing the cost of downhole gauge installations.
    •  Allows for pressure testing the production tubing as well as the primary seal, while inserting the stator. (Double Run System only)
    • Has the ability to use any progressing cavity pump without performing any modification which increases install options.
    • Our system can pull the rotor out of the wellbore without unseating the primary seal when using the Double Run and Single Run flushable systems.
    •  Systems available to fit inside 2 7/8", 3 1/2", 4 1/2" & 5 1/2" production tubing.

    Specifications

    The insert pump seating mandrel fits the following standard API seating nipples:

    •  3 1/2" API seating nipple with 2.780" seat.
    •  2 7/8" API seating nipple with 2.280" seat.

     The insert seating mandrel also fits the following non-API seating nipples:

    •  5 1/2” seating nipple with 4.625” seat.
    •  4 1/2” seating nipple with 3.810” seat.
    •  3 1/2" seating nipple with 2.831" ID
    •  2 7/8" seating nipple with 2.325" ID

    Related Products