• BRANDT™ H 2 S Mud Gas Separator

    The H2S Mud/Gas Separator is designed for continued drilling in underbalanced conditions where dramatic pressure surges are normal.

     

    Description

    SAFELY REMOVES LARGE VOLUMES OF FREE GAS, WITH CERTIFIED ABS, NACE, OSHA, AND ASME DESIGN

    In dangerous “kick” conditions, the Mud/Gas Separator allows operators to circulate the drilling fluid by removing large pockets of gas. The gas cut mud enters the unit, where it hits a series of baffle plates. These baffle plates provide surface area for the dispersion of the gas cut mud. The mud is routed to solids control equipment for further processing while the separated gas travels to the flare line at the top of the unit to be vented at a safe distance from the rig and rig personnel. Contact your NOV sales representative for more information. 


     

    Features/Benefits

    FEATURES

    BENEFITS

    Can be certified to NACE MR-01-75, OSHA 29CFR 1910, ATEX Category 2

    Non-Electrical (ATEX 94/9/EC) and/or ASME Boiler and Pressure Vessel

    Code Section VIII, Division I, Section IX, Lethal Service.

    Certified design for installation in nearly all applications

    High processing capacity

    Continued drilling in a variety of conditions

    Removal of dangerous H2S

    Promotes safe rig environment

    Baffle plates within vessel

    Efficient removal of free gas

    Customizable specifications

    Built to match drilling program and application

    Back pressure manifold in flare line

    Control of the deliver y of gas to the flare line

    Liquid-level control valve or U-tube

    Provides more effective liquid seal to optimize processing effectiveness and efficiency

    Skid-mounted or Skirted design

    Easy transportation, rig-up and rig-down

    Available with a liquid seal monitor and/or manifold instrument multiplier

    Allows for monitoring of liquid seal integrity and fluid temperature while being able to integrate with other rig systems

    Includes manway

    Provides access for internal inspection

    Specifications

    GENERAL

    Common MGS for Onshore Applications

    Common MGS for Offshore Applications

    Liquid Inlet Size

    6 in (152 mm)

    10-12 in (254-305 mm)

    Mud Discharge Size

    10 in (254 mm)

    10-12 in (254-305 mm)

    Gas Discharge Size

    8 in (203 mm)

    6-8 in (152-203 mm)

    Diameter

    48 in (1219 mm)

    48-72 in (1219-1829 mm)

    Wall Thickness

    0.375 in (9 mm)

    0.625 in (16 mm)

    Pressure Rating

    125 psig

    150-200 psig

    *Other configurations available upon request.