• CT-DOG™

    The coiled tubing diameter and ovality gauge (CT-DOG) is an economical, real time monitoring device for detecting tubing dimensional imperfections such as necked or ballooned sections and dents while the coiled tubing is running in or out of the hole.

     

    Description

    A microprocessor in the digital display unit analyzes the measurements and displays ovality and minimum, maximum and average diameters. This data is also available through an RS232 interface to our Orion™ data acquisition system or other computers. The CT-DOG is made up of a sensor head with 12 probes, dual function cable for power and data transmission, operator interface and signal processing module and power supply.

    Principle of Operation

    The cylindrical sensor head surrounding the coiled tubing contains three rings, each with four eddy current proximity probes in a radial array. The 90º spacing between the radials gives six OD measurements with 30º spacing around the coiled tubing. The sensing element of each probe faces the work string in the center of the ring, and each probe measures the distance from its face to the surface of the coiled tubing. Two diametrically opposite probes form a measurement pair. For a given measurement pair, the difference between the probe-to-probe spacing and the sum of these gap measurements is the OD. Thus, each ring provides two orthogonal diameters and a measure of the ovality of the coiled tubing cross section. Ovality is twice the difference of the two diameters divided by their sum: 2 x (ODmax - ODmin)/( ODmax + ODmin).

    The cylindrical sensor head splits lengthwise in a manner that allows it to close around the work string. Thus, CT-DOG can be installed on the coiled tubing between the reel and injector head at any time during operations. The sensor head attaches rigidly to the reel level wind. A single cable connects the sensor head to the remotely located operator interface and signal processing module.

    Operator Interface and Signal Processing Module

    • Supplies power for the probes
    • Converts the analog signal from each probe into a 8-bit digital signal
    • Calculates diameters from the probe readings
    • Calculates the maximum and minimum OD and the maximum ovality for the scanning interval (usually about 1 second)
    • Digitally displays for calculated values
    • Transmits calculated values to external computer via an RS232 interface
    • Compares calculated values against user-defined limits and trigger alarms
    • User interface for calibrating the sensor head and setting alarm limits

    Features/Benefits

    • Digitally displays maximum, minimum and average OD, ovality percentage, individual and paired sensor diameters and alarm flags 
    • User-defined alarms for diameters and ovality
    • Audible alarms for out-of-limit conditions
    • Display update once per second
    • Keypad user interface
    • Field calibration of probe spacing
    • Installation on coiled tubing at any time during operations
    • Bi-directional measurement
    • Easily maintained

    Specifications

    FeatureSpecification
    Diameter measurements6 (30° radials)
    Coiled tubing OD range1 ¼" to 2 ⅞"
    Axial resolution (100 ft/min)0.120"
    OD measurement accuracy+ .010"
    Temperature sensitivity0.0004” / °C
    Bi-directionalYes
    Self-contained electronics/displayYes
    Orion compatibilityYes
    Digital data output capabilityRS232
    Tool head dimensions20" OD x 19" L
    Tool head weight57 lbs.
    Power110 VAC or 12 VDC
    Integrated length measurementsYes

    Related Products