• Cable Injector

    Our cable injector pumps cable into and out of coiled tubing while it is still on the reel.



    The cable injector system greatly reduces costs when compared to vertical or horizontal installations. The system also has the benefit of quickly installing cable without reducing the fatigue-life of the coiled tubing string. Our cable injection systems are skid mounted for ease of transportation offshore. Using the system, a coiled tubing string may be lifted onto a platform without the cable inside, therefore reducing the total weight of the lift. The cable can then be installed before a job and removed after a job.


    • No impact on fatigue life of coiled tubing 
    • Fast (up to 200 ft/min) 
    • All coiled tubing sizes 
    • Small footprint (79" x 73") 
    • Installs wireline cable and plastic-coated cable while the coiled tubing remains mounted on the reel 
    • Rugged, field-proven design 
    • Third-party certification/registration available


    Cable/Wireline Spooling Unit

    Axle Shaft DiameterDemensions (LxWxH)Max. Spool Load Limit
    3"110" x 84" x 74"6,000 lbs.

    Cable Injector Unit

    Work-surface Dimensions (L x W)Max. Working PressureWeight: North Sea CertifiedWeight: Non-certified (Hoist included)
    79" x 73"10,000 psi7,500 lbs.8,000 lbs.


    Our coiled tubing cable installation system uses the following equipment to pump (inject) cable into a reel of coiled tubing:

    • Cable injector unit
    • Reel mounted coiled tubing
    • Cable/wireline spooling unit 


    Related Products