• CBM System

    Improve uptime and reduce maintenance costs associated with personnel and inventory requirements through early identification of potential failure.

     

    Description

    The CTES Condition Based Monitoring (CBM) System is a custom real-time monitoring system for your intervention and stimulation equipment. This system is designed to improve uptime and reduce maintenance costs associated with personnel and inventory requirements through early identification of potential failures.

    To insure the system is aligned with your team’s desired goals, we work closely with you to determine specific equipment and data points to monitor. This system can monitor your pump, bearing, filter and engine health along with hydraulic power and lubrication systems or specific bearings of motors or pumps.

    If equipment results are not within acceptable tolerances, a visual alarm is displayed and optional SMS message alerts can be programmed for multiple recipients - both on and off site.

    The CBM System can be panel or VESA mounted on your desired interface. The information obtained from the on-board data acquisition system is viewable on the full color HMI display. The stored information can be viewed and analyzed in the cabin or downloaded to a USB drive for later review. 

    Specifications

    FeatureSpecification
    CertificationsCBM System non-hazardous area
    List additions markingsIP6X T 80C, T95C, T135C
    Operating temperature32° to 104°F (0° to 40°C)
    Operating voltage controller19.3 VDC to 31.2 VDC
    Power controller72 Watts @ 24 VDC fuse protected
    Acquisition Communications1 x RJ45 10/100Mbs Ethernet port
    HMI CommunicationsRJ 45-10/100/1000 Mbps Ethernet for Modbus
    USB Ports1 x USB port 
    HMI display dimensions (W x H x D)13" x 10" x 2"
    Enclosure dimensions (W x H x D)16" x 14" x 8"

    Other

    Tier 1

    • On-board equipment collects and stores short-term data, 30+ days, personalized for each customer
    • System alerts via text messages and email with customer provided Internet of SMS service
    • 16 available data points may include
      • Oil condition
      • Pressures
      • Vibration
      • Temperatures
      • Engine hours and engine codes via J1939
      • Environment via J1939 connection to available engine

    Tier 2

    • All of Tier 1
    • 30 total available data points
    • Location via installed GPS tracker
    • Data is uploaded to CTES servers for detailed evaluation and reporting of trends
      • Secure, one-way access point prevents potential threats
      • Data transfers via customer supplied access
        • Internet
        • Cellular
      • 6 month data storage allows better system analysis and degrading trend identification

    Tier 3

    • All of Tier 2
    • 50 total available data points
    • Failure Mode Predictive Analysis
    • Data storage available for 1 year - additional time is negotiable
    • Web-based access available for smart phones, tablets and personal computers
      • Smart mapping shows geographical locations with quick access to summary data and links to detail pages per unit
      • Customizable equipment snapshot reports provide high level status and event monitoring